Have a look at our new entry level 22LR suppressor...









This suppressor averages 115dB with no FRP on most host weapons. It comes apart for cleaning with normal shop tools. A 1/4 hex is broached into the distal endcap and you can use an adjustable wrench or a 15/16 socket for the rear endcap. No take down tools needed.

Rated calibers: 22LR, 22 WRM, .17HMR including full auto 22LR.
Finish: Black Oxide
Tube Material: 316 SS
Endcaps: 316 SS
Blast Baffle: 316 SS
OD: 1"
Length: 5.4"
Weight: 6.4 oz
Threads: 1/2X28 UNEF
Sound Reduction: 115dBA average (correct MIL-STD testing with CCI Std Velocity with a variety of pistols and rifles in 22LR)
Retail: $199

Available from stocking XCaliber Dealers

Very nice. I'm assuming that you are using the same type of baffles as the genesis series, is that a correct assumption?

[email protected] wrote:Very nice. I'm assuming that you are using the same type of baffles as the genesis series, is that a correct assumption?

They are very close to the original Genesis baffles, but slightly different. Extremely quiet and will not disappoint. I have some video to release when I can find more time.

All other baffles in Al?

That is correct. 7071T6 Al baffles for the remainder.