Load data 147 HST

Be careful -- low-volume ratio loads can detonate. Mangement not responsible for load data. Use at your own risk.

Moderators:mpallett, bakerjw

Post Reply
New Member
Joined:Thu Dec 10, 2020 9:03 pm
Load data 147 HST

Post by THL » Mon Dec 14, 2020 4:54 pm

I’m looking for good starting load preferably with n320 or n340. I also have some clays, autocomp, power pistol, be-86 and others. Use will be in supprressed glock 17 and various subguns/PCC’s. Vihtavuouri has data for 147 XTP with COAL of 1.142. XTP projectile length is .025-.030 shorter than HST so if I just add the difference I’m over SAAMI max with the HST. My computer just s--t the bed so no quickload until new one arrives. I’m inclined just to start with 3.9 grains n340 and COAL of 1.165 and see what happens.

User avatar
Silent But Deadly
Joined:Sun Mar 30, 2008 8:40 am

Re: Load data 147 HST

Post by wildfowler » Fri Jan 21, 2022 9:04 pm

Is nobody here anymore?

I use about 3 1/2 grains of Bullseye with a 147 JHP bullet.

Brass just barely drips out the side of my Glock 17 with SWR suppressor.
driven every kind of rig that's ever been made, driven the backroads so I wouldn't get weighed. - Lowell George

Post Reply