Sub Sonic Load Data for a 20 inch 300 Whisper

Be careful -- low-volume ratio loads can detonate. Mangement not responsible for load data. Use at your own risk.

Moderators: mpallett, bakerjw

Post Reply
User avatar
silentbushmaster
Silent But Deadly
Posts: 300
Joined: Sun May 07, 2006 9:47 pm

Sub Sonic Load Data for a 20 inch 300 Whisper

Post by silentbushmaster »

Any load data for a 20 inch 300 Whisper with H110 with 220 grain bullets? :wink:
"10TH Mountain Division, Climb to Glory"
User avatar
memfuzz
Silent Operator
Posts: 88
Joined: Sat Dec 24, 2005 9:38 pm
Location: Memphis

Post by memfuzz »

I'm using 8.9 grains, but haven't shot over a chrono yet. Hope to have that done in a few days.
User avatar
silentbushmaster
Silent But Deadly
Posts: 300
Joined: Sun May 07, 2006 9:47 pm

Post by silentbushmaster »

The data that I have shows that about 9.5 grains of H110 should be about 1030 fps. I will check speeds this weekend. Keep us posted on your data. :)
"10TH Mountain Division, Climb to Glory"
User avatar
silentbushmaster
Silent But Deadly
Posts: 300
Joined: Sun May 07, 2006 9:47 pm

Post by silentbushmaster »

221 Fireball Case Reformed

220 gr RN Sierra Bullet

10.0 gr H110

CCI SR BR Primer

1040 FPS

This is for a Remington 700 action w/ a 16.25 length barrel.

Accuracy is sub MOA.
"10TH Mountain Division, Climb to Glory"
User avatar
Garrett
Silent But Deadly
Posts: 640
Joined: Thu Oct 12, 2006 8:34 pm
Location: Western Michigan

Post by Garrett »

I have 1189 fps from a 10" SSK Contender barrel.

10.5 gr. H110
Sierra 220 gr. RNSP
1.235 OAL

Might need to back that load off some.
Post Reply