I want to build a reflex can like a OPS Inc that is on the Mk12 mod 0
I also want to be able to use it on my SBR with a 12" barrel. To do that i would have 2 seperate endcaps to mount the can.
Would the endcap be considered another suppressor.
What is considered a suppressor part
-
- Member
- Posts: 22
- Joined: Fri Sep 30, 2016 1:01 pm
-
- Member
- Posts: 22
- Joined: Fri Sep 30, 2016 1:01 pm
Re: What is considered a suppressor part
Well i figured it out.
A little googling on my part and multiple threads, some on this forum came up.
The answer at least on this forum is NO. As a form 1 builder you cannot have multiple endcaps, so I will have to modify my design.
I guess its been asked here so often people are tired of replying
A little googling on my part and multiple threads, some on this forum came up.
The answer at least on this forum is NO. As a form 1 builder you cannot have multiple endcaps, so I will have to modify my design.
I guess its been asked here so often people are tired of replying
- Capt. Link.
- Silent But Deadly
- Posts: 2829
- Joined: Wed Oct 17, 2007 9:05 pm
- Location: USA.
Re: What is considered a suppressor part
You can't have multiple end caps but you can have several mounting adapters. A standard today is a end cap with a 1.375x24 hole in it so Nielsen devices flash hiders etc can be used.milsurpcollector1970 wrote: ↑Sun Dec 03, 2023 12:25 pm I want to build a reflex can like a OPS Inc that is on the Mk12 mod 0
I also want to be able to use it on my SBR with a 12" barrel. To do that i would have 2 seperate endcaps to mount the can.
Would the endcap be considered another suppressor.
The only reason after 243 years the government now wants to disarm you is they intend to do something you would shoot them for!
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895