tubless can, blast chamber material

Yes, it can be legal to make a silencer. For everything Form-1, from silencer designs that are easily made, to filing forms with the BATF, to 3D modeling. Remember, you must have an approved BATF Form-1 to make a silencer. All NFA laws apply.

Moderators: mpallett, bakerjw

Post Reply
User avatar
mr fixit
Silent But Deadly
Posts: 490
Joined: Fri Mar 02, 2012 10:09 am
Location: N.E. Texas

tubless can, blast chamber material

Post by mr fixit »

curious about materials. I'd like to make tubeless can for .556. I have some 17-4 for baffles with integral skirts as spacers. What about the blast chamber section of the can. What Stainless will weld to 17-4 cones well?
User avatar
Capt. Link.
Silent But Deadly
Posts: 2836
Joined: Wed Oct 17, 2007 9:05 pm
Location: USA.

Re: tubless can, blast chamber material

Post by Capt. Link. »

mr fixit wrote: Sat Aug 17, 2024 9:43 pm curious about materials. I'd like to make tubeless can for .556. I have some 17-4 for baffles with integral skirts as spacers. What about the blast chamber section of the can. What Stainless will weld to 17-4 cones well?
I can't think of single reason not to continue with 17-4
The only reason after 243 years the government now wants to disarm you is they intend to do something you would shoot them for!
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
User avatar
mr fixit
Silent But Deadly
Posts: 490
Joined: Fri Mar 02, 2012 10:09 am
Location: N.E. Texas

Re: tubless can, blast chamber material

Post by mr fixit »

Just having to bore it out of solid bar. Was hoping stainless in tubing would work.
User avatar
Capt. Link.
Silent But Deadly
Posts: 2836
Joined: Wed Oct 17, 2007 9:05 pm
Location: USA.

Re: tubless can, blast chamber material

Post by Capt. Link. »

mr fixit wrote: Tue Aug 20, 2024 11:15 am Just having to bore it out of solid bar. Was hoping stainless in tubing would work.
You know the swarf gods need their sacrifice.
The only reason after 243 years the government now wants to disarm you is they intend to do something you would shoot them for!
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
BWS Arms
Member
Posts: 15
Joined: Wed Sep 06, 2023 7:58 pm

Re: tubless can, blast chamber material

Post by BWS Arms »

I have a stick of 1-1/2 316 SS DOM tube. I hadn’t thought about using it until now. You could weld your 17-4 baffles and mount to it.
FFL 07/02 SOT
User avatar
mr fixit
Silent But Deadly
Posts: 490
Joined: Fri Mar 02, 2012 10:09 am
Location: N.E. Texas

Re: tubless can, blast chamber material

Post by mr fixit »

I'm wondering how well joining 316 and 17-4 would work
BWS Arms
Member
Posts: 15
Joined: Wed Sep 06, 2023 7:58 pm

Re: tubless can, blast chamber material

Post by BWS Arms »

Use 309L rod for filler if needed. I dont think you would have a problem with just fusion.
FFL 07/02 SOT
Post Reply